Updated Component or Library

Changes to Component

Hydraulics library

The hydraulics library has been significantly enhanced.  MapleSim now supports continuous hydraulics.  The update includes 28 new hydraulics components.

Electrical > Machines > Utilities > Vf Controller

new parameter Economy mode

Electrical > Machines > Power Converters > DCDC > Control > Voltage To Duty Cycle

new parameter use constant Vmax

Electrical > Machines > Sensor > Rotor Displacement Angle

new parameters Positive range, threshold

Electrical > Quasistationary > Multiphase > Admittance, Impedance, Variable Admittance, Variable Impedance

new parameters Frequency dependent, $\mathrm{f\_\_ref}$

Electrical > Quasistationary > Single Phase > Admittance, Impedance, Variable Admittance, Variable Impedance

new parameters Frequency dependent, $\mathrm{f\_\_ref}$

Signal Blocks > Discontinuous > Limiter

new parameter homotopy type. No longer used: limits at initial

Signal Blocks > Discontinuous > Slew Rate Limiter

new parameter Init type, $\mathrm{y\_\_start}$

Signal Blocks > Discontinuous > Variable Limiter

new parameters homotopy type, $\mathrm{y\_\_simplified}$ . No longer used: limits at initial

Signal Blocks > Mathematical > Functions > Harmonic

new parameters use complex conjugate, x0Cos, x0Sin

Signal Blocks > Mathematical > Functions > Integrator

new I/O set, reset and new parameters use set, use reset

Signal Blocks > Mathematical > Functions > Limited Integrator

new I/O set, reset and new parameters use set, use reset

Signal Blocks > Mathematical > Functions > Logarithm

new parameter base to set the base of the logarithm

Signal Blocks > Sources > Complex > Log Frequency Sweep

new parameter start time