
Calling Sequence


InvariantSolutions(PDESYS, DepVars, S, 'options'='value')


Parameters


PDESYS



a PDE or a set or list of them; it can include ODEs and nondifferential equations

DepVars



optional  may be required; a function or a list of them indicating the dependent variables of the problem

S



optional  a list with the functional form of the infinitesimals of a symmetry generator, or a list of lists of them

checkconsistency = ...



optional  can be true or false (default), to check the consistency of PDESYS before proceeding

closesystem = ...



optional  can be true or false (default), to derive and then include in PDESYS, explicitly, all its integrability conditions before computing the determining system for its symmetries

degreeofinfinitesimals = ...



optional  related to the option typeofsymmetry = polynomial, indicates the upper bound degree of the polynomial infinitesimals with respect to all or each of the dependent variables

dependency = ...



optional  indicates the dependency of the invariant solutions, as a number (of jet variables), a range of them, a name, or a set of dependencies each of which can be a set or list of variables or numbers

dependencyofinfinitesimals = ...



optional  same as dependency but for the infinitesimals with which the invariant solutions are constructed

discardinfinitesimalswithintegrals = ...



optional  can be true or false (default), to discard infinitesimals that contain uncomputed integrals

display = ...



optional  can be true or false (default), to display or not the solutions on the screen as they are computed

HINT = ...



optional  a list with the functional form of the infinitesimals of a symmetry generator

invariants = ...



optional  a list of lists, where each inner list contains invariants to be used to compute group invariant solutions

numberofsolutions = ...



optional  can be a nonnegative integer or the keyword all, to specify the maximum number of invariant solutions desired; default is 10

onlythetransformation = ...



optional  can be true or false, to return or not just the different transformations used to reduce the number of independent variables of PDESYS

reducedsystemsolver = ...



optional  can be pdsolve or InvariantSolutions, specifies the command to be used to solve the system resulting from reducing the number of independent variables of PDESYS

reduceinonego = ...



optional  a positive integer up to infinity, specifies how many independent variables are reduced in one go; default is as much as possible

removeredundant = ...



optional  can be true or false (default), to remove or not, redundant solutions which happen to be particular cases of more general solutions being returned together

simplifier = ...



optional  indicates the simplifier to be used instead of the default simplify/size

specialize_Fn = ...



optional  can be true, false (default), or a set of procedures, to specialize any arbitrary functions that may appear in the infinitesimals

specialize_Cn = ...



optional  can be true (default) or false, to split or not the list of infinitesimals into cases by specializing the integration constants $\mathrm{\_Cn}$

typeofsymmetry = ...



optional  can be any of pointlike (default), contact, evolutionary, or general, or any of polynomial or functionfield, or And(<kind>, <functionality>) where kind is any of the first three types mentioned and functionality is any of polynomial or functionfield, indicates the type of symmetry to be computed

usestandardinvariants = ...



optional  can be true or false (default), to use the standard Invariants instead of the CharacteristicQInvariants for the purpose of computing the invariant solutions





Description


•

Given a PDE problem (PDESYS), as an equation or a set or list of them, the InvariantSolutions command computes the socalled group invariant solutions of PDESYS; these are solutions derived from ndimensional symmetry groups admitted by PDESYS by reducing the number of independent variables by n in one go. From a practical point of view, this is an important difference with regards to the socalled similarity solutions (also implemented in PDEtools  see SimilaritySolutions) where the number of independent variables are reduced one at a time and to arrive at a solution requires computing further symmetries for the reduced equation at each step. A "similarity solutions" approach can also be performed using InvariantSolutions using the optional argument reduceinonego = 1. InvariantSolutions also works with anticommutative variables set using the Physics package using the approach explained in PerformOnAnticommutativeSystem.

•

The groupinvariant solutions for PDESYS returned in one step by InvariantSolutions, can also be computed step by step, by first computing the determining PDE system, next solving this system to obtain the infinitesimals. With the infinitesimals, you compute an invariant transformation to reduce the number of independent variables of PDESYS. Finally you solve the reduced system to change variables back, resulting in the solutions for PDESYS. You can compute any of these steps directly departing from PDESYS, respectively using the commands: DeterminingPDE, Infinitesimals, InvariantTransformation, dchange and InvariantSolutions.

•

If DepVars is not given, InvariantSolutions will consider all the differentiated unknown functions in PDESYS as unknowns of the problems. Specifying DepVars however permits not only restricting the unknowns in different ways but also specifying unknowns of the problems which do not appear differentiated in PDESYS.

•

It is possible to indicate the functional form of the symmetries, as shown in the examples, otherwise InvariantSolutions will compute only the solutions that can be derived from the point symmetries admitted by PDESYS.

•

To avoid having to remember the optional keywords, if you type the keyword misspelled, or just a portion of it, a matching against the correct keywords is performed, and when there is only one match, the input is automatically corrected.


Optional arguments



A number of optional arguments can change the default computational behavior of InvariantSolutions in ways that, depending on the example or your needs, may be preferred.

•

checkconsistency = true  false


The default value is false; when true, the consistency of PDESYS is checked before proceeding. Note that one could construct the determining system for the symmetries of an inconsistent PDESYS, in which case the solution of the determining system and everything else derived from it would be meaningless.

•

closesystem = true  false


By default InvariantSolutions processes PDESYS as given. If, in PDESYS, all the integrability conditions that can be derived from its equations are explicitly present, then the determining system for the symmetries is assured to have for solution all the symmetries of PDESYS. Otherwise, the determining system for the symmetries may in rare situations also (correctly) include equations that however may restrict the possible values of the symmetry solutions, and hence some of the symmetries be missed. Correspondingly, some invariant solutions may not be present in the output of InvariantSolutions. Note also that, for a system to be closed, it is not sufficient to have it in reduced involutive or equivalent form produced by the casesplit and rifsimp commands or the DifferentialAlgebra package. To assure that all the integrability conditions are explicitly present use the option closesystem. See also the Library routine CloseSystem.

•

degreeofinfinitesimals = nonnegint  set(function = nonnegint)


This option is related to the option typeofsymmetry being polynomial or functionfield explained below. By default, an upper bound for the degree of the polynomial dependency of the infinitesimals on the jet variables is determined by the Library routine UpperBounds. To override this behavior pass degreeofinfinitesimals = n, where $n$ is a nonnegative integer, so that Infinitesimals, called by InvariantSolutions, will search for infinitesimals all of them of degree $n$. You can also specify the degree of each infinitesimal, say, ${\mathrm{\_\ξ}}_{1}$, ${\mathrm{\_\ξ}}_{2}$, ${\mathrm{\_\η}}_{1}$, passing, say, degreeofinfinitesimals = {_xi[1] = n, _xi[2] = m, _eta[1] = p}, where $n$, $m$, $p$ are nonnegative integers.

•

dependency = name  nonnegint  range(nonnegint)  set(name)  list(name), or a set or list of any of the previous types


The righthandside is a positive integer, or a set or list of independent variables of the PDE problem represented by PDESYS, respectively indicating either the minimum number of independent variables on which the solutions are expected to depend, or the actual independent variables expected in this dependency. This option is relevant in connection with the fact that some of the group invariant solutions do not depend on all the independent variables of the problem. If this option is not indicated, the solutions returned are computed regardless of their dependency, using as many symmetries as possible in one go.

•

dependencyofinfinitesimals = name  nonnegint  range(nonnegint)  set(name)  list(name), or a set or list of any of the previous types


This option is used to specify the dependency of the infinitesimals, typically to restrict it so that their computation is easier.

–

When dependencyofinfinitesimals = name, all the infinitesimals are assumed to depend only on that name variable.

–

dependencyofinfinitesimals = n where $n$ is a nonnegative integer generates a search for infinitesimals depending on any of the permutations of $n$ jet variables; this is useful in contexts where we need only infinitesimals depending on just some ($n$) variables.

–

Specifying an integer range dependencyofinfinitesimals = n..m generates a search for infinitesimals depending on any permutation of $k$ variables where n < k < m, so depending on not less than $n$ and no more than $m$ variables.

–

Specifying a set of lists, say the jet variables are $x$, $t$, and $u$, so for instance as in dependencyofinfinitesimals = {[x], [x, t], [t, u]} will generate a search for infinitesimals depending on any of the tree lists of variables specified.

–

Specifying a set or list of names generates a search for infinitesimals depending on any but only one of the indicated variables.

•

discardinfinitesimalswithintegrals = true  false


The righthandside is either true or false, to discard or not infinitesimals that contain uncomputed integrals before attempting the computation invariants with them and the related group invariant solutions. The default value of this option is false. Passing discardinfinitesimalswithintegrals = true however can remove from the computational process invariants that due to the presence of integrals slow down the solving process significantly even when not help to find any more solutions.


The righthandside is either true or false, to display or not the solutions on the screen as they are computed  that is before the final form of the output, typically involving many group invariant solutions, is ready to be returned. The default value of this option is false.

•

HINT = <functional form of the infinitesimals>


The functional form of the infinitesimals can be specified as a list of algebraic expressions, there must be as many as the number $n$ of independent variables plus the number $m$ of dependent variables to be correspondingly associated with ${\mathrm{\_\ξ}}_{1}$ to ${\mathrm{\_\ξ}}_{n}$ and with ${\mathrm{\_\η}}_{1}$ to ${\mathrm{\_\η}}_{m}$. Alternatively this list can contain $n+m$ equations, where the lefthandsides contain any functions of name variables and the righthandsides contains the actual hint being suggested. In both cases, the algebraic expressions (or those in the righthand sides) may or not contain functions to be determined so that the problem has solution. If there are no functions, then either the given HINT exactly solves the determining system for the infinitesimals, and hence is used as given to construct solutions, or it doesn't in which case they are discarded.

•

invariants = [[algebraic, ...], [algebraic, ...], ...]


The righthandside is a list of lists, where each inner list contains invariants represented by algebraic expressions, to be used to compute the group invariant solutions. When this option is used, InvariantSolutions will not attempt to compute any infinitesimals for PDESYS and will instead use the given lists of invariants directly.


Note there is a connection between the number of invariants (e.g., in one of these lists) and the number of independent variables that can be removed from the problem in one go. For a PDESYS problem involving n independent and m dependent variables, a point symmetry of PDESYS has n + m  1 differential invariants of order zero. Recalling: invariants of order j involve at most derivatives of order j of the dependent variables. For each additional point symmetry enlarging the symmetry group, this number o differential invariants of order zero, now simultaneously invariant under the whole group, gets reduced by one. So, when n + m  k invariants of order zero are passed, InvariantSolutions will attempt first a reduction of k variables in one go, then k  1 and so on until either achieving the numberofsolutions or exhausting the use of the invariants received for the purpose of computing solutions.

•

numberofsolutions = nonnegint


The righthandside is a positive integer indicating how many solutions InvariantSolutions will attempt to compute before interrupting the process and returning the solutions found. This option is relevant in connection that, depending on the Infinitesimals and related Invariants found, the computation of all the related solutions may take more time than desired in a situation where only some solutions are required. The default behavior is to compute the 10 group invariant solutions obtained by reducing the number of independent variables as much as possible in one go (that is using many symmetries at the same time).

•

onlythetransformation = ...


The righthandside is either true or false, to return or not just the different transformations used to reduce the number of independent variables of PDESYS. This option is used by the InvariantTransformation command to compute these transformations. By combining this option with the other options you can search in an optimized way for only the transformations you are interested in. This option is also of use when the transformation to reduce  say by k  the number of independent variables in one go exist, but the system fails in solving the resulting reduced problem. In these cases it may be that by working with the transformation and the reduced PDEs system you may arrive to the solution to the original PDESYS after some interactive steps.

•

reducedsystemsolver = ...


The righthandside is either pdsolve or InvariantSolutions, specifies the command to be used to attempt solving the reduced PDESYS. The default command used is a combination of pdsolve, dsolve and solve and whenever the solution obtained involves ODESolStruc or DESol, this solution is discarded as unsuitable for representing PDE solutions. (Note: this may change in the future.)


The righthandside is a positive integer, say k; infinity is allowed meaning as much as possible. This number k specifies how many independent variables are to be reduced in one go. The default value is infinity. When this option is passed, only solutions obtained by reducing k variables in one go are returned. Note also that this option interacts with the numberofsolutions = ... option in that InvariantSolutions will not compute more solutions than the value of numberofsolutions.


The righthandside is either true or false, to remove or not redundant solutions that frequently appear in the set of group invariant solutions; they may be redundant in that they may be particular cases of more general solutions being returned together.


The righthandside indicates the simplifier to be used instead of the default which is simplify/size. This option is of use not just to simplify the solutions. You can specify any procedure to be used as simplifier; in this way you can have the solutions computed InvariantSolutions postprocessed entirely in the way you need before being returned (e.g. discard some, do something else with other ones, etc.).


The righthandside is either true or false, to split or not the list of infinitesimals into cases by specializing the integration constants $\mathrm{\_Cn}$ (see related discussion in Infinitesimals) before computing invariants in the framework of the process to derive groupinvariant solutions from these infinitesimals. The default of this option is true. This option is irrelevant when invariants are passed using the invariants = ... option described above.

•

specialize_Fn = true  false  set(procedure)


By default the arbitrary functions $\mathrm{Fn}\left(\mathrm{...}\right)$ entering the returned infinitesimals are not specialized. When specialize_Fn = true, these functions are specializing, taking all of them but one equal to 0, the remaining one equal to 1 and to each of its arguments. So if an arbitrary function has  say  three arguments, then there will be four specializations. Alternatively you can specify a set of procedures to be applied to the arguments of the arbitrary functions, each one resulting in a different desired specialization.

•

typeofsymmetry = pointlike  evolutionary  contact  general  polynomial  functionfield  And(symmetry_type, functionality_type)


By default InvariantSolutions will search for point symmetries to construct the corresponding invariant solutions. Alternatively you can request it to search for symmetries with polynomial or functionfield type of functionality, or of evolutionary, contact or general symmetry types instead of pointlike, where in this context general means infinitesimals depending on derivatives of each unknown of the system up to order $n1$, where $n$ is the differential order of the unknown as found in the system, and evolutionary is like general but with the $\mathrm{\xi}$ infinitesimals (related to transformations of the independent variables) all equal to zero. The righthandside can also be of the form And(symmetry_type, functionality_type) where symmetry_type is any of pointlike, evolutionary, contact or general, and functionality_type is one of polynomial or functionfield, the latter related to the FunctionFieldSolutions command. In these cases, You can set the degree of the polynomial or functionfield form using the option degreeofinfinitesimals explained above.

•

usestandardinvariants = true  false


By default, InvariantSolutions will search for solutions by computing invariants from the characteristicQ function of the symmetries. The same computation can be carried out using the standard Invariants, normally resulting in a more complicated computation, though sometimes preferred for investigation or pedagogical reasons. For that purpose pass usestandardinvariants = true




Examples


InvariantSolutions is programmed to automatically return invariant solutions (up to 10) reducing as many independent variables as possible in one go. So invoking it as in InvariantSolutions(PDE) would suffice for that purpose. Most of the time, however, we are interested in either the most general invariant solutions, or those that can be computed faster, or that depend only on certain variables and so on. The following examples aim at illustrating the different ways of computing all these solutions.
Consider the wave equation in four dimensions; to avoid redundant typing on input and on the display use diff_table and declare
>

$\mathrm{with}\left(\mathrm{PDEtools}\right)\:$

>

$U\u2254\mathrm{diff\_table}\left(u\left(x\,y\,z\,t\right)\right)\:$

>

$\mathrm{declare}\left(U\left[\right]\right)$

${u}{}\left({x}{\,}{y}{\,}{z}{\,}{t}\right){}{\mathrm{will\; now\; be\; displayed\; as}}{}{u}$
 (1) 
>

$\mathrm{pde}\left[1\right]\u2254U\left[x,x\right]+U\left[y,y\right]+U\left[z,z\right]U\left[t,t\right]=0$

${{\mathrm{pde}}}_{{1}}{\u2254}{{u}}_{{x}{,}{x}}{+}{{u}}_{{y}{,}{y}}{+}{{u}}_{{z}{,}{z}}{}{{u}}_{{t}{,}{t}}{=}{0}$
 (2) 
Compute just two solutions, both depending on the four variables {x, y, z, t}, reducing the number of independent variables only by three in one go (so that the problem becomes an ODE)
>

$\mathrm{InvariantSolutions}\left(\mathrm{pde}\left[1\right]\,\mathrm{numberofsolutions}=2\,\mathrm{dependency}=4\,\mathrm{reduceinonego}=3\right)$

${u}{=}{\mathrm{\_C1}}{+}\frac{{\mathrm{\_C2}}}{\sqrt{\frac{{{t}}^{{2}}{}{{y}}^{{2}}{}{{z}}^{{2}}}{{{x}}^{{2}}}}}{,}{u}{=}\frac{{\mathrm{\_C1}}{}\left({{t}}^{{2}}{}{{x}}^{{2}}{}{{y}}^{{2}}{}{{z}}^{{2}}\right){+}{\mathrm{\_C2}}}{{{t}}^{{2}}{}{{x}}^{{2}}{}{{y}}^{{2}}{}{{z}}^{{2}}}$
 (3) 
Compute four solution depending at least on {x, t} (note these may depend on arbitrary functions $\mathrm{\_Fn}$ where n is an integer); display each of them as soon as it is computed (before computing the other ones)
>

$\mathrm{InvariantSolutions}\left(\mathrm{pde}\left[1\right]\,\mathrm{numberofsolutions}=4\,\mathrm{dependency}=\left\{t\,x\right\}\,\mathrm{display}\right)$

${\mathrm{invariants}}{=}\left[{{t}}^{{2}}\right]$ 
  