Chapter 2: Space Curves
Section 2.4: Curvature
Use the appropriate formula from Table 2.4.1 to determine the curvature of yx=x3/2,x≥0, then obtain the curvature from first principles, that is, by calculating the rate at which the tangent turns as arc length increases.
The curvature is given by
=34x 4+9 x3/243/2
=6x 4+9 x3/2
To obtain this result from first principles, begin by obtaining the arc-length function
sx=∫0x1+y′t2ⅆt = ∫0x1+94t dt = 4+9 x3/2−8/27
and its inverse, x=xs=8+27 s2/3−4/9. The angle made by the tangent line and the x-axis is θ=arctany′x. The curvature is the rate at which this angle varies as s changes. Hence, the derivative of θ must be taken with respect to s. Either the chain rule or the substitution x=xs must be used. Making the substitution leads to θ=arctan328+27 s2/3−4/9, so the derivative with respect to s becomes
Replacing s with sx then gives
κ=θ′sx=a|f(x)s=sx = 619⁢4+9⁢x3/22/3−49⁢4+9⁢x3/2 = 6x 4+9 x3/2
Calculate the curvature as per Table 2.4.1 .
Define the function yx
Context Panel: Assign Function
yx=x3/2→assign as functiony
Compute the curvature for x>0
Write the expression for the curvature.
Context Panel: Evaluate and Display Inline
Context Panel: Simplify≻Assuming Positive
y″x1+y′x23/2 = 34⁢x⁢1+94⁢x3/2→assuming positive6x⁢4+9⁢x3/2
Calculate the curvature from first principles.
Obtain sx, the arc-length function on the interval 0,x
Write the appropriate integral.
Context Panel: Assign to a Name≻S
∫0x1+y′t2ⅆt = −827+127⁢4+9⁢x3/2→assign to a nameS
Obtain xs, the inverse of the arc-length function
Apply the solve command and select the first (of three) solutions, the last two of which are complex. Assign this solution to the name X.
Obtain θs=arctany′s, where the derivative is taken with respect to x
Assign to the name θ, the arctangent of y′x, which is then evaluated at x=xs=X.
Compute θ′s and replace s with sx
Calculus palette: Differentiation template
Differentiate θ with respect to s and press the Enter key.
(This is the rate of change of θ taken with respect to the arc length.)
Context Panel: Evaluate at a Point
Replace s with sx=S
ⅆⅆ s θ
→evaluate at point
<< Previous Example Section 2.4
Next Example >>
© Maplesoft, a division of Waterloo Maple Inc., 2023. All rights reserved. This product is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation.
For more information on Maplesoft products and services, visit www.maplesoft.com
Download Help Document