Rotational Elasto-Backlash 2
Backlash connected in series to linear spring and damper (backlash is modeled with elasticity)
Modelica Standard Library
The Rotational Elasto-Backlash 2 component consists of a backlash element connected in series with a spring and damper elements which are connected in parallel. The spring constant must be positive.
In the backlash region no torque is exerted. Outside this region, contact is present and the contact torque is computed with a linear spring/damper characteristic.
If the backlash parameter b is smaller than bε, the backlash is ignored and the component reduces to a spring/damper element in parallel.
During initialization, the backlash characteristic is replaced by a continuous approximation in the backlash region.
Left flange of compliant 1-dim. rotational component
Right flange of compliant 1-dim. rotational component
Optional heat port
Spring constant (c > 0 required)
Unstretched spring angle
Use Heat Port
True (checked) means heat port is enabled
Nominal value of φrel
Prioritize φrel and wrel as states
The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.
1-D Mechanical Overview
Rotational Springs and Dampers
Download Help Document